C R I M P M A C H I N E S |
Product overview CRIMPMATIC 971–150/220
Crimp press built in a compact steel plate design for high twisting rigidity and with frequency controlled drive and fixture for adaption of common standard and column applicators for processing strip and loose piece terminals.
Standard equipment:
- CE-conform, moveable safeguard with full cover of applicator
- moveable spool arm for quickly exchange of end and sidefeed reels
- adaption of column applicators via t-bolt
- 3-point applicator fixture plate
- programmable logic controller
- 7" TFT color Display
- dual-touch (projected capacitive)
- wide screen 800 x 480 pixels
- High-performance EDGE2 Technology processor
- OPC UA communication
- IP54 protection (front)
- set-up menu with creep speed function
- notice of malfunction in cleartext
- service menu, password protected
- various counters
- different operating modes for strip and loose piece terminals
- 230 V – safe plug socket
Technical specifications | CRIMPMATIC 971–150 | CRIMPMATIC 971–220 |
Compression force: | 150 kN | 220 kN |
Motor output: | 3 kW | 4 kW |
Operating voltage: | 400 V, 3~/N/PE, 50/60 Hz | 400 V, 3~/N/PE, 50/60 Hz |
Control voltage: | 24 V = | 24 V = |
Air-pressure: | 6 - 8 bar | 6 - 8 bar |
Wire cross-section: | up to 70.00 mm² (depends on terminal) | up to 100.00 mm² (depends on terminal) |
Idle stroke: | 44 mm | 44 mm |
Lower dead centre: | 204.78 mm 182.98 mm | 204.78 mm 182.98 mm |
Cycle time: | 1.7 - 2.5 s | 1.7 - 2.5 s |
Noise level: | < 75 dB (A) | < 75 dB (A) |
Dimensions (WxDxH): | 750 x 740 x 1110 mm | 750 x 740 x 1110 mm |
Weight: | 610 kg | 640 kg |
Gallery:
